Material - VeroWhite PolyJet Resin (FC-830)

PolyJet is a resin like material. This photopolymer resin offers improvements as compared to our Clear PolyJet Resin such as improved mechanical properties, enhanced visualization of details and edges, improved humidity resistance and better flexural strength. Parts from this material can be chrome plated or used as a master for silicone molds. Typical industries include toys, foot wear, architecture and any industry where feature detail and surface finish are required.

Available Colors

VeroWhite PolyJet Resin (FC830)

Note: On-screen and printer color representations may vary from actual colors

Achievable Accuracy
PolyJet Resin: Layer Thickness - Horizontal build layers down to 16 microns (0.0006 inches).

Build Resolution - X axis: 600 dpi. Y axis: 300 dpi. Z axis: 1600 dpi.

Part Accuracy: (Note, Objet does not provide part accuracy data only build resolution, so the accuracies defined below are based on our best judgment)

± 0.005 < 4 inches is typical
± 0.008 is generally the worse case but it is geometry dependant

Maximum Build Dimensions*

• 12 x 12 x 7 (inch)

• 305 x 305 x 178 (mm)

*Larger parts can be built in pieces and bonded if necessary)