Material - TangoPlus PolyJet Resin (FC-930)

TangoPlus, FullCure930 - expands the Tango family of rubber-like materials, offering exceptional elongation at break, excellent toughness and durability and high resistance to tearing. It addresses a broad range of applications requiring rubber-like flexibility and durability, such as gaskets and seals, hoses, athletic footwear, toys and more.

The new material offers unmatched combination of mechanical properties that sets a new standard in rubber-like performance. At 218%, the elongation at break of TangoPlus is more than double that of any other rapid prototyping material available on the market. It is highly resistant to tearing and has a Ross Flex measurement in excess of 150,000.

Thus, TangoPlus offers outstanding resistance to deterioration, making it ideal for models that are likely to be exposed to long use or rough handling.

Available Colors

TangoPlus PolyJet Resin (FC930)

Note: On-screen and printer color representations may vary from actual colors

Achievable Accuracy
PolyJet Resin: Layer Thickness - Horizontal build layers down to 16 microns (0.0006 inches).

Build Resolution - X axis: 600 dpi. Y axis: 300 dpi. Z axis: 1600 dpi.

Part Accuracy: (Note, Objet does not provide part accuracy data only build resolution, so the accuracies defined below are based on our best judgment)

± 0.005 < 4 inches is typical
± 0.008 is generally the worse case but it is geometry dependant

Maximum Build Dimensions*

• 12 x 12 x 4 (inch)

• 305 x 305 x 102 (mm)

*Larger parts can be built in pieces and bonded if necessary