- RedEye Advantages
- Factory of the Future
- > Case Studies
- White Papers
- Videos
- Webcasts
- e-Newsletter
- Articles
- Finishing Briefs
"Digitally manufacturing the fixture with
polycarbonate took it from eight pieces to one,
more accurate piece that lines up."
Chris H.
Engineering Manager
Wair Products
Case Studies:
RedEye is the on-demand service for Stratasys - the world leader in rapid prototyping and low-volume manufacturing equipment. Read more about how RedEye and Stratasys customers are using FDM technology for prototyping, jigs and fixtures and direct digital manufacturing.
Your project. Your parts. Your partner. RedEye.
RedEye Case Studies:
 |
Creating an "Alien" Bike Rack with FDM Technology: "Because
the design had so many curves, every time it went in a different
direction, we would have had to cut one of the pipes. It would
have been nearly impossible to fabricate with traditional
milling procedures. 3D printing was the most cost-efficient and
precise way to manufacture these parts. With FDM technology,
only 18 parts were needed. That's a tremendous difference." said Francis Bitonti, Principal with FAD Architecture Read Case Study |
 |
Bringing Back the Fun of Aviation: "Using RedEye eliminated
the tooling process for us, We put the parts in place on the
airplane and then laminated structural composites over them.
They became a tool for the structural part." said Matthew Gionta, Chief Technology Officer and Vice President of Engineering, ICON Aircraft Read Case Study |
 |
Motorcyclists are Truly Blessed: "We knew with RedEye that
we had an opportunity to reduce the front-end cost to our
customer and help get the product to market in a shorter time
frame," said Jessie Nichols, Brainchild Enterprises Read Case Study |
 |
Flower Mound Underwater Vehicle: We saw your
technology used by a college at a different competition in San
Diego, last year. We were impressed with their design and decided to explore the potential with our design for this years competition. said Luke Cragin, team captain for the four-member high school team. Read Case Study |
 |
Custom Application: "Having access to intuitive
technology like FDM, makes it easy to create custom
applications." |
 |
Landing Gear Prepared for Flight: "If we would have had these machined, it would have taken two to three times longer, even though design details would have been eliminated to expedite delivery and keep costs down. RedEye actually delivered all of the landing gear components, with every design detail, faster than we could use them." Chris Brookfield, principal designer at Messier-Dowty |
 |
Redeye Customer Realizes there is more to Services than just Prototypes: "Digitally manufacturing the fixture with polycarbonate took it from eight pieces to one, more accurate piece that lines up." Chris H., engineering manager at Wair Products Read Case Study|
Download PDF |
[105k]
 |
Weathering the Elements: "Because the FDM prototypes held up under these conditions, I'm confident that we can begin rapid manufacturing of ATM components with FDM." Rich Lute, Diebold |
RedEye Customer Applications of the Month:
 |
KOL/MAC LLC Architecture and Design: French Museum |
 |
Wm. K. Walthers Inc.: Automotive Models |
 |
The Schneider Electric Sensor Competency Center/Hyde Park Electronics LLC: Sensor Replacement |
 |
Dr. Javier B.: Syringe Storage Containers |
 |
SURVICE Metrology: iGPS laser scanning system |
Stratasys Case Studies:
See how
Stratasys system owners are using
FDM technology. Learn more
about
Stratasys systems.
Automotive | Aerospace
|
Commercial
and Industrial Equipment |
Consumer
Products | Medical
|
Dana Corporation
View Case Study > |
|
Klock Werks Kustom Cycles
View Case Study >
|
|
BMW
View Case Study >
|
|
Joe Gibbs Racing
View Case Study >
|
|
Ducati
View Case Study >
|
|
Hyundai Mobis
View Case Study >
|
|
Parker Hannifin Racor
View Case Study >
|
|
Steve Prentice Design, Ltd.
View Case Study >
|
|
Bell Helicopter
View Case Study >
|
|
Diebold
View Case Study >
|
|
University of Central Florida
View Case Study > |
|
NorSap
View Case Study > |
|
Toro
View Case Study > |
|
Oreck Manufacturing Company
View Case Study > |
|
Bullard
View Case Study > |
|
Commercial Manufacturer
View Case Study > |
|
Logitech
View Case Study > |
|
Access Business Group
View Case Study > |
|
Rapid Models and Prototypes, Inc.
View Case Study > |
|
Medtronic Sofamor Danek
View Case Study > |
|
Logica
View Case Study > |
Request a Quote
Quote, buy and build your parts online.
Receive free and secure instant quotes with
the RedEye STL File Analyzer.
Free Sample Parts
Request a sample kit of an ABS plastic part, Ready Part finished part, Vero fine feature detail part and a flexible TangoPlus part.
Request a Sample Kit >
Get More Information
|
Materials Comparison Chart |
|
Material/Part Image Gallery |
|
Technology & Industry Videos |
Newsletter Signup
Sign up for our monthly newsletter to get the latest RedEye news, information on
applications, case studies, materials and promotions.
Sign up today >
View the current issue >
|
©2005-2008 RedEye RPM. All Rights Reserved. RedEye is a Stratasys business unit. Email: GoDigital@redeyerpm.com | Toll Free: 1.866.882.6934 | Int’l: 1.952.906.2725 | Fax: 1.952.906.2765 |
 |